| |
Dell Optiplex Power Supply F5114
Product Number F5114
F5114 Replaces the following computer power supplies: | Dell WU123 Note! It may be necessary to purchase the "SATA Y Splitter" adapter. This is offered right below the picture of the power supply and right above the "buy now" button. Check whether you need this or not before ordering. | | Dell FR597 | | Dell Optiplex 760 | | Dell F5114 | | Dell L280P-00 | | Dell X9072 | | Dell PS-5281-3DF | Dell Dimension C521 Note: A sata splitter should be added if you have more than 1 sata device. | | Dell Optiplex GX620 Mini Tower | | Dell A280P-00 | | Dell AA24120L | | Dell P9550 | | Dell N220P-00 | | Dell NPS-220AB A | | Dell Optiplex GX520 SFF | Dell D280P-00 Note! To be 100% compatible you must add one "IDE to SATA adapter" and two pieces of the "Y-Splitter". This is offered right below the picture of the power supply and right above the "buy now" button. | | Dell Optiplex 745 DT | | Dell NC912 | | Dell M8803 | Delta DPS-280DB A Note! To be 100% compatible you must add one "IDE to SATA adapter" and two pieces of the "Y-Splitter". This is offered right below the picture of the power supply and right above the "buy now" button. | | Liteon PS-5281-3DF | | Newton NPS-220AB A |  |
|
Key Features:
- 350 watt upgrade to your old 280 watt
- Used in small form factor Dell computers like Optiplex, Dimension, and XPS
Product Description:
This 350 watt power supply was retrofitted to fit in place of your original F5114 power supply. Since the F5114 is discontinued this 350 watt upgrade comes at just the perfect time. It mounts in the same place as your original power supply and uses two screws to hold it in place. This power supply is required to replace power supplies in Dell Optiplex GX280 SD (Small Desktop) computers. This power supply has all of the special dell connectors needed to get your GX280 SD back up and running. The F5114 may be one weird power supply, but you can always count on us to carry all of the weird power supplies!
Technical Specs:
- 5" Wide X 4 " Tall X 5.25 " Deep
- One ATX connector (24 pin)
- One 12V connector for P4 motherboards
- One IDE 4 PIN connector
- One Floppy 4 PIN connector
- One SATA connector
| Output |
Max. Load |
| +5Vsb |
2.5A |
| -12V |
0.5A |
| +12V1 |
12A |
| +12V2 |
16A |
| +5V |
20.0A |
| -5V |
0.3A |
| +3.3V |
20.0A |
|