Shuttle PC63 500 Watt Power Supply

Product Number PC63

Click to enlarge

$129.99

The power supply above comes with the connectors shown. If you need additional connectors you may add from the list below:

No Power Cord +$ 0.00 Power Cord +$1.00 view image
No Y-Splitter +$ 0.00 Y-Splitter +$4.00 view image
No PCI Express Adapter +$ 0.00 Molex to PCI Express Adapter +$6.00 view image
No Zip Ties +$ 0.00 Lot of 10 Zip Ties +$2.00 view image
No 20 to 24 pin atx adapter +$ 0.00 20 to 24 pin atx adapter +$6.00 view image
No 20 pin atx extension +$ 0.00 20 pin atx extension +$5.00 view image
No IDE to SATA adapter +$ 0.00 IDE to SATA adapter +$6.00 view image
No 6 Pin AUX adapter +$ 0.00 6 Pin AUX adapter +$15.99 view image
No Sata Y Splitter +$ 0.00 Sata Y Splitter +$6.00 view image

PC63 Replaces the following computer power supplies:

Shuttle PC63

Shuttle XPC SN78SH7

Shuttle XPC SG45H7

Shuttle XPC SP45H7

Shuttle XPC SX58H7

Shuttle PC63I0002

Shuttle PC6300L

Shuttle XPC H series

Key Features:

1. For use in Shuttle XPC H series cases
2. 500 watts
3. Three 12 volt rails totalling 49 amps
4. 80 PLUS Bronze certified

Product Description:

The Shuttle PC63 is a 500 watt power supply upgrade for Shuttle XPC computers that use the H7 computer case. Some models of XPC H7 series computers that use this power supply are SN78SH7, SG45H7, SP45H7 and SX58H7. With the Shuttle PC63 you will enjoy great efficiency thanks to its 80 PLUS Bronze certification. Power the latest graphics cards with its 8 pin 12v and dual pci express connectors. With three 12 volt rails running at a total of 49 amps there is not much out there that you will not be able to run.

Technical Specs:

• 3.2" Wide X 2.1" Tall X 7.9" Deep
• One ATX connector (20 pin)
• One PCI Express connector
• One PCI Express (6+2) connector
• One 8-Pin ATX/EPS connector
• Two Molex connectors
• One floppy connector
• Three SATA connectors
• Certifications: FCC class B, CE, BSMI, cUL, TÜV, CB, BSMI, CCC