atx power supplies Power Supply Universal Laptop Power Adapter
Power Supplies - ATX Contact Order Status Checkout Power Supply Cross Reference Laptop Power Supply Cross Reference


FSP300-60GNF-R - FANLESS 300 Watt ATX Power Supply

Product Number FSP300-60GNF-R

FSP300-60GNF-R Fanless 300 Watt Power Supply


The power supply comes with the connectors shown. If you need additional connectors you may add from the list below:
view image
view image
view image
view image
view image
view image
view image
view image
view image
view image
view image
view image
view image
view image
view image
view image is safe to buy from.

Replaces the following computer power supplies:

Key Features:

  • Output over voltage protection
  • Short circuit protection on all outputs
  • Active PFC circuit
  • Full range input
  • Real no-noise design, full load =0dB
  • High efficiency over 86%
  • AC input full range
  • MTBF: 100K hours at 25°C
  • Fanless power

Product Description:

Dead silence anyone? How about a fanless power supply with a noise level of 0 db? This FSP300-60GNF-R Fanless 300 watt power supply can certainly operate in stealth mode under any circumstances. Enjoy FSP quality combined with total silence in this high end computer power supply.

Easily converts from 20 to 24 pin atx connector to adapt to your application... an excellent 20 pin to 24 pin atx connector adapter.

Technical Specs:

  • ATX Form factor
  • 6.00" Wide X 3.25" Tall X 5.75" Deep
  • One ATX 2.03 connector (20 pin or 24 pin)
  • One 12V connector for P4 motherboards
  • Four IDE 4 PIN connectors
  • One Floppy 4 PIN connector
  • Two SATA connectors
  • Voltage: 100-240 VAC full range
  • Frequency: 47 Hz to 63 Hz
  • Input current: 3.5 amps maximum / 115 Vrms, 60 Hz. 2 amps maximum / 230 Vrms, 50Hz.
  • Over-voltage protection: +5V, +3.3V, +12V1, +12V2
  • Over-current protection: +5V, +3.3V, +12V1, +12V2
  • Remote ON/OFF control: The power supply shall accept a logic collector level which will disable / enable all output voltage (excluding +5V standby)
  • Power good signal: turn-on delay 100 ms to 500 ms
  • Efficiency: 86% min.
  • Hold-up time: 17.0 ms minimum: at 115V / 60 Hz 17.0 ms minimum: at 230V / 50 Hz
  • Operating conditions: ambient temperature 0C~30C, 5~95% RH
  • Storage and shipping conditions: ambient temperature -20C~80C, 5~95% RH
Output Min. Load Max. Load Load Reg. Ripple & Noise
+3.3V 0.5A 20A ±5% 80mV P-P
+5V 0.3A 20A ±5% 100mV P-P
+12V1 1A 8A ±5% 200mV P-P
+12V2 1A 14A ±5% 200mV P-P
-12V 0A 0.8A ±10% 200mV P-P
+5Vsb 0A 2A ±5% 100mV P-P

Copyright © 2004-2022
142 Jodie Williams Road, Suite ATXPS
DeRidder, LA 70634
Phone: 800-458-1606