Cart (0)

Molex IDE to 8 Pin EPS CPU Converter Adapter

$9.99

ADD TO CART

The power supply comes with the connectors shown. If you need additional connectors you may add from the list of options:

No Power Cord +$ 0.00 Power Cord +$1.00 view image > No Y-Splitter +$ 0.00 Y-Splitter +$4.00 view image > No PCI Express Adapter +$ 0.00 Molex to PCI Express Adapter +$6.00 view image > No Zip Ties +$ 0.00 Lot of 10 Zip Ties +$2.00 view image > No 20 to 24 pin atx adapter +$ 0.00 20 to 24 pin atx adapter +$6.00 view image > No 20 pin atx extension +$ 0.00 20 pin atx extension +$5.00 view image > No 20 pin atx splitter +$ 0.00 20 pin atx splitter +$14.99 view image > No 24 to 20 pin atx adapter +$ 0.00 24 to 20 pin atx adapter +$6.00 view image > No Molex to SATA adapter +$ 0.00 Molex to SATA adapter +$6.00 view image > No SATA to Molex adapter +$ 0.00 SATA to Molex +$6.00 view image > No 6 Pin AUX adapter +$ 0.00 6 Pin AUX adapter +$15.99 view image > No Sata Y Splitter +$ 0.00 Sata Y Splitter +$6.00 view image > No Molex to P4 Converter +$ 0.00 Molex to P4 Converter +$6.00 view image > No P4 Extension +$ 0.00 P4 Extension +$5.00 view image > No Power Supply Tester +$ 0.00 Power Supply Tester +$9.99 view image > No LCD Power Supply Tester +$ 0.00 LCD Power Supply Tester +$14.99 view image
ADD TO CART

Key Features:

• Converts Two Molex (IDE) connectors into One 8-Pin CPU/EPS connector

Product Description:

This molex to 8-pin CPU/EPS adapter was designed to give you the ability to add the latest i3/i5/i7 technology to your power supply without having to go out and buy a brand new unit. The 6 inch adapter uses two spare molex connectors and converts them to the 12 volt 8-pin EPS/CPU connector that is required on more and more motherboards and graphics cards.

Technical Specs:

• Overall length: 6 inches (15 cm)
• Wire gauge: 18 AWG
• Weight: 0.6 oz
• 0.0375